To seal a wood split, you can use wood glue or epoxy resin to fill in the crack and create a strong bond. First, clean the area around the split and then apply the glue or resin, making sure to fill in the entire crack. Use clamps to hold the wood together while the glue or resin dries. Once the sealant has dried, sand the area to smooth out any rough edges and then finish with a coat of wood finish or paint to protect the wood and blend the repair with the rest of the surface. **

No, a wood fire typically does not reach temperatures high enough to melt a metal container. Most common metals used in containers, such as aluminum or stainless steel, have melting points much higher than the temperatures typically achieved in a wood fire. However, prolonged exposure to intense heat from a wood fire could potentially cause a metal container to warp or weaken. **

To seal holes in wood, you can use wood filler or epoxy. Wood filler is a putty-like substance that can be pressed into the hole and then sanded down to be flush with the surface of the wood. Epoxy can also be used to fill holes in wood, and it is particularly useful for larger or deeper holes. Simply mix the epoxy according to the instructions, fill the hole, and then sand it down once it has dried. Both wood filler and epoxy can be stained or painted to match the surrounding wood. **

To treat or seal visible wood, you can use a variety of products such as wood sealers, wood stains, or wood oils. Before applying any product, it is important to properly clean and sand the wood surface to ensure a smooth finish. Once the surface is prepped, you can apply the chosen product using a brush, rag, or sprayer, following the manufacturer's instructions for best results. Allow the product to dry completely before adding additional coats if needed. **

To seal wood with epoxy resin, first ensure that the wood is clean and free of any dust or debris. Then, mix the epoxy resin according to the manufacturer's instructions. Apply a thin coat of the mixed epoxy resin to the wood using a brush or roller, making sure to spread it evenly. Allow the first coat to dry completely before applying additional coats as needed to achieve the desired level of sealing and protection. Sanding between coats can help to achieve a smooth and even finish. **

You can use wood glue to seal wood joints. Wood glue is specifically designed to create a strong bond between wood surfaces, making it an ideal choice for sealing joints in woodworking projects. It is important to apply the wood glue evenly and allow it to dry completely to ensure a secure and durable seal. Additionally, you can also use wood fillers or epoxy resin to seal wood joints, depending on the specific requirements of your project. **

You can fasten a screw in wood without a nut by using a technique called "wood screwing." This involves drilling a pilot hole in the wood that is slightly smaller than the diameter of the screw, and then driving the screw into the hole using a screwdriver or power drill. The threads of the screw will grip the wood and hold it in place without the need for a nut. Additionally, you can use a countersink bit to create a recessed area for the screw head to sit flush with the surface of the wood. **

The weight of wood can vary depending on the type and moisture content, but on average, 1 cubic meter of wood weighs around 700-900 kilograms. So, a 7 cubic meter container can hold approximately 4.9 to 6.3 metric tons of wood. This estimate includes veneer wood, beams, and boards, but keep in mind that the actual weight may vary based on the specific type and condition of the wood. **